Upon comprehensive examination of the reviewed studies, a consistent finding emerged: MIH-affected teeth demonstrated the potential for remineralization via calcium phosphate-based strategies. Finally, the use of calcium phosphates, including CPP-ACP, calcium glycerophosphate, and hydroxyapatite, proves beneficial in the remineralization process for MIH-compromised teeth. MIH-associated tooth pain finds respite through the combined actions of MIH-remineralization, CPP-ACP, and hydroxyapatite.
Employing laser scan profilometry on polymethyl methacrylate (PMMA) surfaces, this in vitro study examined the correlation between abrasive particle concentration and toothpaste abrasivity. The goal was to offer a novel screening process for new toothpaste formulations. Utilizing distilled water and four sample toothpastes, each with a varying amount of hydrated silica (25, 50, 75, and 100 wt% respectively), the efficacy of PMMA plates was assessed within a toothbrush simulator. Through the manipulation of sodium carboxymethyl cellulose and water, a constant viscosity was achieved in the model toothpaste formulations. Micrometer-scale resolution laser scan profilometry was utilized to evaluate the brushed surfaces, and the total volume of the introduced scratches, along with the roughness parameters Ra, Rz, and Rv, were subsequently calculated. The same toothpaste formulations were subject to commissioned RDA measurements, which were then employed to ascertain the correlation between the outcomes generated by different techniques. The same experimental procedure, applied to five commercially available toothpastes, yielded results that were then compared against our model system. Correspondingly, we illustrate the attributes of abrasive hydrated silica and describe how these affect the surfaces of PMMA samples. Analysis of the results reveals a positive correlation between the weight percentage of hydrated silica and the abrasiveness of the model toothpaste. For all tested model toothpastes, as well as commercial ones free of PMMA-damaging ingredients, the increasing roughness parameter and volume loss values are strongly correlated with the rising RDA values. ABC294640 cell line The results of our study allow us to define an abrasion classification, which adheres to the RDA's existing system for commercially available toothpastes.
Cleaning during retro-preparation in endodontic microsurgery is vital for successful treatment.
Following instrumentation and single-cone filling, forty mandibular premolars underwent retro-preparation and were allocated to experiment A. The retro cavity in group A2 was cleaned with a 2 mL solution of sterile saline, administered after the retro preparation. To deliver all the previously-mentioned irrigation solutions, a 30-gauge endodontic needle with a lateral vent was utilized. Subsequently, within group A2, the cavity received the insertion of 17% EDTA gel and 525% gel, which were then activated by way of ultrasonic tips. Upon completion of the irrigation protocols, the specimens were decalcified in preparation for histological evaluation.
The experiment demonstrated a marked difference in hard tissue debris levels between group A1 and group A2, with group A1 accumulating significantly more.
< 005).
Analysis of the A2 group samples, processed using the new protocol, revealed statistically meaningful results.
Group A2 samples, when subjected to the new protocol, manifested statistically significant results.
To ensure optimal tooth anatomy and reduce chairside time is a significant goal of modern restorative dentistry. The stamp technique's adoption in clinical practice is on the rise. A primary objective of this study was to determine the efficacy of this method in terms of microleakage, voids, overhangs, and marginal adaptation of Class I restorations, while also analyzing operating time in correlation with standard restorative procedures.
Two groups were made up of twenty extracted teeth each. Ten teeth in the study group (SG) were Class I prepared and restored employing the stamp technique; in the control group (CG), ten teeth were similarly prepared, but restorations were performed traditionally. SEM analysis was employed to ascertain the presence of voids, microleakage, overhangs, and marginal adaptation, and operative times were simultaneously logged. Statistical analysis of the data was performed.
Comparative assessments of the two groups demonstrated no noteworthy discrepancies in microleakage, marginal adaptation, or filling defects, yet the employment of the stamping technique appeared to facilitate the development of expansive, overflowing margins demanding a scrupulous finishing process.
Restoration durability appears unaffected by the application of the stamp technique, which can be executed within a relatively brief timeframe.
The stamp technique, though completed quickly, does not compromise the durability of the restoration.
The impact of chewing simulation on the fracture load of pre- and post-treatment zirconia crowns that were trepanned and repaired with composite resin was examined in this study. A total of fifteen 5Y-PSZ crowns were tested in each of three groups. The unmodified crowns' fracture load, for group A, was the subject of an evaluation. The procedure for group B included trepanation and composite resin repair on the crowns, which were then evaluated through a fracture test. Group C crowns were prepared identically to those in group B, except that they were subjected to thermomechanical cycling before the final fracture tests were performed. Group C samples underwent scanning electron microscopy (SEM) and X-ray microscopy (XRM) analysis. The average fracture loads and standard deviations for each group were: 2260 N ± 410 N (group A), 1720 N ± 380 N (group B), and 1540 N ± 280 N (group C). Group A exhibited a statistically significant difference compared to both group B (p < 0.001) and group C (p < 0.001), as determined by the Tukey-Kramer multiple comparisons test. Surface splits, apparent after aging, were visualized using SEM, but no cracks extending through the crown from the chewing surface to the inner portion were demonstrable through X-ray radiography. ABC294640 cell line Within the scope of this study, trepanation and composite repair of 5Y-PSZ crowns resulted in reduced fracture loads in comparison to 5Y-PSZ crowns that remained untreated with trepanation.
A hypothetical exploration of customer journey concepts is undertaken in this case study, centering on a dental patient (customer persona) with a focus on special care dentistry. As an educational exercise, this paper elucidates how dental and allied professionals can apply customer journey strategies to optimize patient-centricity in their practice settings. The hypothetical scenario takes into account the organizational context, customer profile, current customer purchase decision-making models, and marketing strategies. By utilizing these components, a customer journey map can be constructed to help visualize and pinpoint the varying customer-business interactions. A conceptual analysis is applied to the customer journey, which consists of the stages of awareness, initial consideration, active evaluation, the pre-purchase period, the purchase itself, and the post-purchase experience. The results of the analyses pinpoint areas of disagreement, arising from a multitude of underlying factors. The case study highlights the potential for substantial improvements by implementing a combination of digitalization and omnichannel marketing, alongside existing internal and multi-channel marketing. ABC294640 cell line The digital transformation in the patient technology landscape and the increasing competitiveness in the dental industry might compel dental care providers currently using traditional marketing methods to adopt innovative, economical digital and omnichannel strategies. Despite any mitigating factors, dental care providers and their associated professionals must uphold a fundamental duty of care, ensuring all practices are legally sound, honest, decent, truthful, and ethically sound.
This review examines the relationship between periodontal disease in pregnant women, preterm birth risk, and low birth weight in newborns.
In November 2021, a bibliographic search was performed to locate relevant material within PubMed/Medline, Cochrane Library, Scopus, EMBASE, Web of Science, Scielo, LILACS, and Google Scholar. Systematic reviews, published in English, and encompassing all time periods, investigating the link between periodontal disease in pregnant women, preterm birth, and low birth weight in newborns were considered for inclusion. Employing AMSTAR-2, the risk of the included studies was determined, and the quality of the evidence and the strength of the recommendations from the findings were assessed using the GRADEPro GDT tool.
Despite initially identifying 161 articles in the preliminary search, only 15 satisfied the required selection criteria, leading to the exclusion of the remaining articles. In a meta-analysis of seven articles, a correlation was observed between periodontal disease in pregnant women and a heightened risk of preterm birth and low birth weight in their newborns.
Low birth weight in newborns, in conjunction with preterm birth, is demonstrably linked to periodontal disease in pregnant women.
Newborns of mothers with periodontal disease during pregnancy frequently experience both preterm birth and low birth weight.
To enhance oral health, health coaching interventions can be utilized to support modifications in behaviors. This review of health coaching interventions for oral health promotion is designed to identify their key characteristics.
The review process incorporated the Preferred Reporting Items for Systematic reviews and Meta-Analyses extension for Scoping Reviews checklist, along with the Joanna Briggs Institute manual for evidence synthesis. For the purpose of searching the databases CINAHL, Ovid, PubMed, Cochrane Library, and Scopus, a search plan integrating medical subject headings and keywords was established and used. Thematic synthesis of the data was achieved through the application of a thematic analysis approach.
A total of twenty-three studies, which met the criteria for inclusion, were integrated into this review. Motivational interviewing and health coaching formed the backbone of the interventions in these studies focused on oral health promotion.